Learn how to polish new leather shoes

Remove old cement layer

If your shoes have a dry layer of cement that is adhered to the shoe, remove this old layer of cement to have a clean layer of leather before new poker.

To save time, you can use a small amount of acetone solution used to remove nail polish, apply it to a clean cloth and will easily remove the old cement on the shoe. Before doing this, of course, what you need to do is clean the dust and dirt on your shoes with a soft brush, then remove the shoelaces. In addition to nail polish remover, you can also use alcohol or a specialized shoe cleaner. The only thing you need to keep in mind is to avoid scratching and wearing the leather surface if you wipe it too hard.

Apply cream for skin shoes

Then, the next step you need to do is restore dry skin. You can do this step with a variety of different substances such as soap for skin, mink oil lotion or other shoe lotions.

At this step, the skin will be softened to be ready to absorb a new layer of cement better, as well as remove any remaining dirt. In order for the conditioner to penetrate deep into the skin, roll your fingers together with a cotton cloth and wipe it evenly over the shoe. This is also the method commonly used for poker but of course poker will be beaten with another cloth so that the substances are not mixed together.

After applying the conditioning layer to the skin, keep the shoes in a cool place for about 20 minutes. Note at every step of the shoe poker process, you will need to dry for at least 10 minutes to help the skin be ngơi rested 'and the substance also has time to promote the true effect.

Poker cream

The next step is to turn the first poker with a brush. In this step, use cream to restore the skin color to the shoe. Do not spread the whole piece on the shoe, but put it a little bit and beat it all over the shoe surface.

With light-colored leather shoes, try a small amount of poker before hitting the inside of the heel to make sure the amount of cement needed to use without ruining the color of the shoe.

Poker

The next step is to polish the shoe by hand. A box of wax balls with beeswax and pine oil in the ingredients will bring the most beautiful skin to the shoes. These are the two components available in most high-end types of poker.

When playing the ball, type in small circles around the shoe surface with two fingers wrapped in cotton. Do not be afraid to press your hand to create a bit of pressure when hitting, it will allow the xi to penetrate the holes in the skin that the naked eye cannot see. This will make the shoe surface completely flat and also the foundation for creating shiny skin like mirrors for shoes.

Put 1 to 2 layers of cement first and let the shoe dry for about 20 minutes. During the waiting period, prepare an extra container of water and a dry poker box. If, after beating, you still feel that the skin is still unable to get to the shiny skin, use dry cement because the new gel is still moist and sometimes causes the skin to not get enough dryness.

After letting the first bubble layer dry completely, add water with the poker to continue polishing the shoe. You can continue to wrap cotton on two fingers to beat and use the finger next to a little water to put on the shoe with each turn. After putting a drop of water (really small) on the shoe, immediately type in the poker circle. Repeat this step for about 1-2 hours on shoes, then let the shoes dry overnight and polish the shoe one last time the next day with a bit of ball and water.

After you have completed the above steps and the shoe has become really shiny, use a black plastic cloth (probably women's socks) to gently wipe the shoe to clean the shoes one last time. This is what you should do every day to preserve the skin of the mirror shadow for the longest time.